Kölner Rapid Stone Mason, yellow, 100 ml

Article Number
3333251
Select your Wishlist:
Please select a wishlist or create one here
Select your Project:
Please select a project or create one here

Kölner Rapid is specifically developed for stone mason requirements.

Drying time only 15 minutes, open time up to 8 hours guarantee.

The adhesive is applied undiluted in two layers with a brush. After approximately 15 minutes of drying (depending on the thickness of the Rapid layer, temperature, and relative humidity), you can either apply a second layer of Rapid or you can start gilding. Beware that the Rapid layer must be completely dry before gilding. After that, you have three days open time to make a high-quality gilding. If it concerns a strongly absorbing surface, several layers of adhesive can be applied. Make sure that the layer is always completely dry before painting a next layer. Sealing of the stone is then no longer necessary.


Especially work outdoors can be done fast, yet with high quality, for example on site or/and at the cemetery.


For large surfaces, Kölner Rapid can be sprayed as well after diluting it with no more than 8 % distilled water. A low pressure sprayer with a nozzle size of 1 – 1,5 mm is recommended. Kölner Rapid can also be applied with a brush.

© Deffner & Johann GmbH