LEDAN® D3 Injection Mortar, Bucket à 15 kg
Special Properties:
Injection mortar for strengthening dry, above-ground masonry structures without frescoes or mosaics. The material has good strength values similar to those of the substrate on which it is used. It also has excellent vapour permeability as well as increased volumetric stability. LEDAN® D3 can be injected without water pre-wetting of the substrate.
Composition:
The composition consists of special hydraulic Portland binders with a high resistance to sulphates, which are chemically stable and have a low content of soluble salts, water and air limes, pozzolan and a special composition of hyper-liquefying additives and substances for improved injectability.
The special composition, prepared in dispersion 1/10,000 for a period not less than 20 minutes, gives a grey homogeneous finished mixture.
Fields of Application: Filling of voids, structural consolidation, sealing of cracks. For the production of injection mortars with individually adjusted chemical-physical properties through the addition of particularly finely ground inert aggregates. Strengthening of large masonry volumes with cost limitation.
LEDAN® injection mortar - on the market for more than 20 years - in the Deffner & Johann range for over 15 years. Only in the original bucket from Tecno Edile, Italy.