Dräger X-plore® 8000 Filter A1B1E1P3 SLR
Combination filter for X-plore® 8500 air purifying respirator blower. Filter for protection from particles, organic gases and vapours when applied by spraying or with brush and roller.
- Identification colour: brown, white, yellow, green
- Protection level: A1/P3
A1 for protection from gases and vapours of organic compounds with a boiling point below 65 °C, e.g. solvent-based paints, adhesives and cleaning agents (turpentine, nitro thinner, petrol, toluene, xylene, etc.) when applied by spraying or with a brush and roller.
FFP3 (Filtering Face Piece - Class 3) for protection from high levels of exposure to hazardous and carcinogenic fine dusts and oil or water vapours. To be used when sanding hardwood and chrome-containing rust protection, zinc, lead and stainless steel, processing glass and mineral fibres and removing mould.
Properties:
- Only suitable for use with the blower filter unit Dräger X-plore® 8500
- Approved according to EN 12941; EN 12942 and AS/NZS 1716:2012
- A1 = gases and vapours of organic compounds, boiling point > 65 °C inorganic gases and vapours (e.g. chlorine, hydrogen sulphide, hydrogen cyanide sulphur dioxide)
- S = Dust particles (Solid)
- L = Aerosols (Liquid)
- R = Use over several work shifts (Repeat)
Please read the complete product instructions before use. Improper use of this protective equipment may result in injury and serious or life-threatening conditions.
Respirators and equipment
Proper protection should be a matter of course for all work involving respiratory hazards. Unfortunately, it is still often underestimated how especially fine dusts, solvent vapors, bacteria, fungi etc. affect our health in the long term. Protect yourself sufficiently today to stay healthy in the future. Health protection at the workplace has become convenient, comfortable and easy.
Please note
So-called "coarse dust masks" do not protect you! Nevertheless, these masks are still widely used because they are cheap and the breathing resistance is pleasantly low. This face mask (the conventional name for the so-called "coarse dust masks") is not approved as respiratory protection. It neither offers protection from fine dusts and paint spray mist nor against released solvents and vapors.
