Kölner Rapid Stone Mason, clear, 100 ml
Acrylic based, for exterior.
Drying / open time 15 min to 8 hours.
Brush-on or spray (thinned) application.
The adhesive is applied undiluted in two layers with a brush. After approximately 15 minutes of drying (depending on the thickness of the Rapid layer, temperature, and relative humidity), you can either apply a second layer of Rapid or you can start gilding. Beware that the Rapid layer must be completely dry before gilding. After that, you have three days open time to make a high-quality gilding. If it concerns a strongly absorbing surface, several layers of adhesive can be applied. Make sure that the layer is always completely dry before painting a next layer. Sealing of the stone is then no longer necessary.
Especially work outdoors can be done fast, yet with high quality, for example on site or/and at the cemetery.
For large surfaces, Kölner Rapid can be sprayed as well after diluting it with no more than 8 % distilled water. A low pressure sprayer with a nozzle size of 1 – 1,5 mm is recommended. Kölner Rapid can also be applied with a brush.