Pantarol® Metal Protection 130 A, for outdoor, 1 l
Article Number
4106419
UN-Number:
UN 1263 Kl. 3 VG II
Danger
H225, H315, H318, H335, H336, H373, H412
Safety Instructions:
P210, P 233, P260, P280, P305+P351+P338+P310, P370+P378
Colourless, pigment-free, polyacrylate-based anti-corrosion lacquer for weather-resistant, high-gloss protective coatings on metal surfaces (especially for non-ferrous metals).
Suitable for air and oven drying.
Pantarol® A is UV-resistant in order to ensure an elastic metal protection surface outdoors.
Product information:
Pre-treatment:
A grease, oil and dust-free, bare metal surface is required to create a durable protective film.
Application by brushing or spraying under the following conditions:
- Brushing: the product is ready for brushing.
- Spraying: prepare for spraying with "Thinner for Pantarol® A" No. 131 in a ratio of 2 parts paint and 1 part thinner. Recommended spraying viscosity: 15 sec/4 mm DIN (20 °C); favourable spraying method at approx. 3 - 4 bar pressure with 0.8 - 1 mm nozzle.
- Rolling: an additive is required for roller application to prevent stringing.
Drying:
- Air-drying: at 15 - 25 °C dust-dry after approx. 15 minutes; hand-dry after approx. 30 - 45 minutes; completely dry after approx. 24 hours.
- Oven drying: completely dry after approx. 1 - 2 hours at an elevated temperature (40 - 60 °C; up to max. 100 °C).
Clean tools immediately after use with "Thinner for Pantarol® A" No. 131.
Yield: If the application recommendations are followed, approx. 8 - 12 m² treatment area per litre.
