Speedheater® SH TWIN
Complete solution for professional use for large-scale indoor and outdoor work - particularly powerful.
- Dimensions: 37 x 33 x 22 cm
- Dimensions heating area : 31 x 30 cm
Package content:
1 x Speedheater® SH TWIN
1 x Boomerang Scraper
1 x Profile Scraper
1 x Board Scraper
3 x Vertical rods for height extension
2 x Scaffold clamps for tubes Ø 40 - 55 mm
2 x Wall fixings
1 x Case
The Speedheater® method removes paint with little effort, which gives you better and longer lasting results. Do your window restoration quickly, simply and safe with a Speedheater®. Remove paint and putty without breaking the glass. We have a solution for every need.
Please have a look:
The Speedheater® SH TWIN
The Speedheater® SH Twin is the high-performance model in the Speedheater® family. The high heat output in combination with the modular support system with long reach enables the effective and economical treatment of larger surfaces such as facades. In common applications, area outputs of 1.5 to 3 m² per hour are achieved.
Boomerang scraper: for working on delicate objects such as windows, furniture and mouldings.
Profile scraper: for working on differently shaped surfaces indoors and outdoors.
Board scraper: for working on larger surfaces indoors or outdoors.
In a practical toolbox for storage and transport.
Technical data:
- Power: 2200 W
- Volt: 220 - 240
- Amp: 9.2
- Heating time of the colour surface: indoors 15 - 30 sec., outdoors 20 - 60 sec.
- Temperature colour surface: 100 - 175 °C
- Connection Schuko plug: standard single-phase grounded outlet , 220 V/5A
- Cord: 3 x 1.5 sq. mm rubber cord, 2.5 m long
- Heating element: 4 x 550 Watt IR tubes
- Life span: 5,000 hours
- CE: in compliance with EN 60335-1, EN 60335-2-45 standards
- Overheat protection
- Weight: 4900 g
Properties:
- Efficient: dissolves all layers of paint at once
- Rational: softens old putty at the same time
- Effortless: simply scrape off paint and putty – quickly, quietly and dust-free
- Gentle on surfaces: no loss of substance as no sanding or sandblasting is necessary
- Side effect: fights mould and fungus through heat
- Low working temperature: energy-saving, reduced risk of accidents. The workpiece does not warp or scorch.
- Occupational safety: no lead vapours, as the working temperature is a maximum of 175 °C
- Further processing: optimum wood moisture content of only 5 to 8 %, smooth surface. Workpiece can be primed immediately without sanding.
