LEDAN® ADRANAL, 1 kg
Mortar for levelling and waterproofing interior or exterior surfaces. Protects masonry from water, vapour permeable, with excellent adhesion.
LEDAN® Adranal is a transpiring mortar for protection against atmospheric agents of surfaces, summit walls, archaeological structures, dome’s extrados, waterproofing of fountains basins, swimming pools and lift shafts.
Ready-to-use with the addition of water only, it is particularly suitable for the restoration of premises where a plaster work is necessary on dump walls or on the ground, as it anchors strongly onto the wall becoming a primer for the new plasters.
Particulary vapour-permeable, is highly waterproof; very resistant to chemical aggressions (chlorine, acid rains etc. )
The product has been formulated to waterproof the Colosseum vaults extrados and, in cooperation with the Archeological Superintendence of the Southern Etruria, the vaults of the tombs in the Tarquinia Necropolis (province of Viterbo). It has been used in Rome in the many Fountains such as S. Maria Maggiore, the Naiadi, the Triton and in the most recent restoration of the Barcaccia, in Nettuno (province of Rome) in the Fountain of the God Neptune.
Particular Features:
The product is a special
pre-mixed perspiring, due
to the special composition
it anchors tenaciously itself
to the common building
materials, becoming
integral part of the
structure. The presence
of natural pozzolana
guarantees an excellent
resistance to the breaking
up action of the marine
aggressive waters.
Composition of Formulation:
It is made up of special binders
with chemical-mechanical high
resistance with a law content
of soluble salts, fine grinded
slate, very fine pozzolana and
a particular combination of
additives. The special formulation,
produced in 1/10,000 planetary
dispersion for a time not under
20 minutes, forms a homogenous
pre-mix of a natural white colour.
Application Fields:
LEDAN® ADRANAL is an extremely versatile
formulation. It can be applied on
summit walls, archaeological
structures, dome’s extrados,
waterproofing of fountains
basins, swimming pools and lift shafts.
Ready-to-use with the addition of water
only, it is particularly suitable for the
restoration of premises where it is
necessary a plaster work on dump
walls or on the ground, as it anchors
strongly onto the wall becoming a
primer for the new plasters. Particulary
vapour-permeable, is highly waterproof;
Extremely resistant to chemical
aggressions (chlorine, acid rains etc.)
Preparation's Instructions:
LEDAN® ADRANAL is a premix
ready-to-use with the addition
of water only.
Knead energetically, for
about 10 minutes ADRANAL
with water. To reach better
results is necessary the use a
mixer tool.
Instructions for use:
1. Remove the friable parts and the plaster; wash well wetting plentifully.
2. Smooth every irregularity to uniform the surfaces.
3. Knead ADRANAL with clean water mixing for at least 10 minutes with electrical mixer tool.
4. Apply the product with brush, till to obtain the total covering of the bottom.
5. Repeat the operation after 4 - 5 hours using preferably a spatula to create a coat of 3 mm.
6) Eventually give a colored coat without waiting for the drying of the last coat. Do not apply resins on the
product.
LEDAN® ADRANAL can be used to waterproof pools, to substitute not perspiring elastomeric sheathes; extrados of vaults, protection of stony surfaces.
Note: Do not apply LEDAN® ADRANAL in periods of extreme cold (with minimum temperatures less than 5 °C) or extreme heat (with maximum temperatures over 35 °C).